Is $1,800 to install new lead flashing and seal brickwork on garage roof a fair price?
Project Details
I have damp showing on my garage wall in three places across the length, mainly on the breeze block and not on the roof. I previously rejected a quote from another roofer who suggested a complete roof replacement.
Quote Details
This quote is for addressing damp issues on the garage wall. The work includes:- Installation of new lead flashing above the whole side of the garage roof.- Sealing of the new lead flashing with leadmate sealant.- Application of DRYZONE wall treatment (2 coats) to all brickwork 1500mm above the flashing.
You say...
Vote Distribution
These ratings are not endorsed by Quote Critic. They are submitted by other Quote Critic users like you.
More Details
Category
Roofing
Price
$1,800
Quote Date
February 22, 2026
Tearoff included?
No
Comments
No comments yet
Sign in to share your thoughts and ask questions.
Similar Quotes
Refelt roof, repair verge, and replace lead flashing
This quote is for a comprehensive roof repair, including refelting, replacement of battens, installation of a dry verge system, and new lead flashing. It also addresses issues with the concrete verge and chimney. - Full refelt of the roof, front and back - Installation of new battens - Implementation of a dry verge system - Installation of a continuous verge - Replacement of existing lead flashing with new lead flashing - Reusing existing tiles and reclaiming additional tiles from elsewhere as needed - Consideration for resetting/reorienting tiles, with specific attention to avoiding small tile cuts at the gable end (ensuring full or half tiles only) and extending battens as required.
Replace garage roof
This option covers the complete replacement of the garage roof, including removal of old materials and installation of new waterproofing and drainage systems. - Remove existing patio surface - Dispose of old roofing and sheathing materials - Install new plywood sheathing - Install insulation board - Apply a multi-layer waterproofing membrane system - Install copper drip edges - Fabricate custom copper drainage components - Flash all masonry junctions with copper - Seal masonry junctions with masonry caulk
Repair flashing between roof and dividing walls
Remediate flashing issues between the roof and dividing walls. - Grind out space in the cement/wall - Properly flash the area - Work covers the entire roof length where the issue is present - Includes a front scaffolding tower