Decking Quotes

Rebuild a complex set of stairs for a two-family upstairs unit using composite materials. - Use Trex composite decking for treads and surfaces - Includes construction of a significant number of steps - Removal and disposal of existing structure

Screening in an existing deck while maintaining current railings. - Install screen system in front or behind current railings - Extend deck dimensions to create a perfect rectangle - Relocate existing stairs

Full teardown and installation of a 271 sqft deck with stairs including: - Blueprints, site plan, and permits - Demolition of existing structure (framing, decking, railing, and stairs) and disposal - Installation of up to 3 steel helical footings - Treated framing with 2x10 green treated lumber at 16" on center and glulam beam - TimberTech Azek Vintage decking laid straight with single picture frame border - Concealed fasteners and color-matched screw/plug system for border - Kadenz 36" black aluminum railing with continuous top rail

Comprehensive restoration and structural repair of a 100 sqft IPE deck including: - Sanding all deck boards and railings with 80 and 120 grit down to clean wood - Applying two coats of Cabot's Timber Oil - Structural repairs including replacing rotted joists and adding hurricane ties/knee braces - Repairing cantilevered beam dry rot using Abatron LiquidWood and epoxy filler - Re-fastening deck boards from underneath and installing Pro Plug hidden screw system on top rails - Touch-up painting on the frame where needed - Note: Customer paid for all materials separately

Build a floating deck anchored to the ground with the following specifications: - 28ft wide x 16ft deep footprint - Wrap-around design for existing tree on the right side - One step down on all three sides spanning the entire length and width - Picture-framed layout using 16-foot treated deck boards - Joists spaced 12 inches on center

Full construction of a new deck on a sloped mountain terrain including: - Installation of sonotube concrete footings for structural support - Support posts reaching up to 6 feet in height - Framing and decking for the specified area

Structural remediation and leveling of the deck corner including: - Jack and level the deck corner to correct 1.75 inch sag - Build support walls below and above the deck - Double up 2x6 posts below and above the deck - Install new PWT/treated LVL beam with taping and flashing

Self-build with assistance from friends and family. - 800 sq ft elevated deck - 12 feet off the ground - Helical pile footings - Deckorators Voyage composite decking - Pressure-treated wood framing

Complete replacement of existing deck including: - Trex Enhance decking installation - Framing repairs to address dry rot - Demolition and haul away of old materials - 740 sq ft area with 2 steps - Estimated 1 week completion time

Ground level deck addition to existing structure. - 84 square feet of pressure treated wood decking - Installation of 2 support posts - Construction of new stairs (2 steps) - Installation of railing

Full removal and replacement of existing deck with pressure-treated wood. - Size: 12'x20' (240 Square Feet) - Footings: Poured concrete above grade with standoff plates - Posts: Pressure treated 6"x6" - Frame: 2"x10" double beam and 2"x10" joists - Decking: 5/4" x 6" pressure treated, face screwed - Railings: 4"x4" posts, 2"x4" rails, and 2"x2" spindles - Stairs: 4' wide with 2 treads - Gate: One at the top of the stairs - Includes removal and disposal of existing deck - Includes tax and permit fees

Labor and materials to restore deck surface damaged by concrete spills and rust. - Sanding of 550 square feet of decking - Removal of concrete leveling compound residue - Removal of rust stains from radiator - Application of deck finish/materials