Is $32,000 to rebuild a 16x20 elevated wood deck a fair price?
Project Details
I have a 16x20 deck overlooking the water that sits about 8-10 ft up. It is older wood and starting to rot. I am considering doing parts of the work myself, like the railings, to save money. I am also debating between wood and composite for the long term.
Quote Details
Full rebuild of an existing elevated deck including: - Demolition and removal of old decking materials - Installation of new pressure-treated wood framing and boards - Installation of new railing system - Work performed at 8-10 ft elevation with water-facing access
You say...
Vote Distribution
These ratings are not endorsed by Quote Critic. They are submitted by other Quote Critic users like you.
More Details
Category
Decking
Price
$32,000
Quote Date
April 21, 2026
Material
Pressure Treated wood
Railing included?
No
Square footage
320
Comments
No comments yet
Sign in to share your thoughts and ask questions.
Similar Quotes
Tear down and rebuild a 200 sq ft elevated deck
Full demolition of existing deck and construction of a new pressure-treated wood deck. - Approximately 171 sq ft (9.5' x 18') - Elevated 8' off the ground - 6x6 support posts with 2x12 beams lag bolted - Includes removal and disposal of old structure - Reattachment to house with proper ledger flashing
Build a 16' x 22' elevated trex deck and remove existing deck
Construct new 16' x 22' elevated deck approximately 10.5' above grade including: - Remove and dispose of existing 16' x 18' elevated deck - Pressure treated framing with 2x12 joists spaced 12" on center - Structural beams and 6x6 support posts - Trex Saddle composite decking - Freedom Cambridge black aluminum railing - 18 step staircase (4 ft wide) - Two 4'x4' stair landings - Concrete footings and required hardware - Jobsite cleanup and debris removal
Demolish and rebuild a small deck with composite decking
The project involved the demolition and full rebuild of a small, two-tiered deck. Initially, the scope was to replace existing wood deck boards with Trex composite boards. However, upon demolition, the entire wooden frame and ledger board were found to be severely rotten, necessitating a complete replacement. - Demolished existing 5x8ft and 3x5ft deck platforms. - Replaced the entire rotten deck frame. - Removed original ledger board, which was improperly screwed over vinyl siding without flashing. - Removed vinyl siding to properly install and flash a new ledger board. - Installed new composite Trex deck boards. - The quoted cost of $1100 is for labor only.