Is $3,300 to repair refrigerant leak and system maintenance a fair price?
Project Details
Selling the home and looking for a cost-effective repair. The homeowner has experience as a low-voltage fire alarm technician and has worked on automotive AC systems. The existing system is a 2-ton unit from approximately 2016, though the furnace was replaced in 2024.
Quote Details
- Replace the valve and repair the high pressure line with proper fittings - Evacuate and recharge refrigerant (R-410A) - Replace capacitor - Replace PVC condensate drain from the plenum
You say...
Vote Distribution
These ratings are not endorsed by Quote Critic. They are submitted by other Quote Critic users like you.
More Details
Category
HVAC
Price
$3,300
Quote Date
May 18, 2026
Location
Ohio
Fuel type
Electric
System type
Air conditioner
Comments
No comments yet
Sign in to share your thoughts and ask questions.
Similar Quotes
Perform comprehensive HVAC system repair and maintenance
This quote covers a comprehensive set of HVAC services, including: - Uninstallation and disposal of the old damaged coil. - Leak free installation of the new coil. - Full system testing and calibration for peak performance. - Uninstallation and disposal of the old damaged filter drier. - Leak free installation of the new filter drier. - Full system testing and calibration for peak performance. - Refrigerant leak detection. - Recover refrigerant. - Nitrogen purge. - Leak repair. - Pressure test. - All refrigerant recovery and recycling following EPA protocol. - Purging refrigerant lines with dry nitrogen. - Accurate refrigerant weigh in/out with calibrated scale. - Complete refrigerant testing for peak system operation using super heat and sub cooling diagnostics. - Adding refrigerant to EPA guidelines. - Remove schrader core with isolation tool. - Install new schrader core and new cap. - Leak test service valve.
Install Mitsubishi 9KBTU Hyperheat Mini Split Heat Pump System for one room
- Perform manual J Load calculation to understand true heating and cooling loads for the area of house served by the furnace - Furnish and install new Heatpump system consisting of Outdoor Unit and Wall Mounted Indoor Unit - Furnish and install Refrigerant piping, interlock wiring and drain tubing - Furnish and install Linehide to cover refrigerant , drain and wire - Furnish and install Condenser Pad - Start up and check test of operation - 1 year labor warranty - 12 year limited manufacturer’s parts warranty
Repair refrigerant leak and recharge r-410a system
Repair a leaking valve and perform a full system evacuation and recharge with R-410A refrigerant. - Replace leaking valve (Schrader valve) - Evacuate and recharge system (includes first pound of refrigerant) - Supply 8 additional pounds of R-410A refrigerant at $164.05 per pound - Leak detection using electronic detector - Nitrogen pressure test to be performed after repair - Unit is located on a condo roof accessible by stairs