Is $8,300 to Install Mitsubishi 9KBTU Hyperheat Mini Split Heat Pump System for one room a fair price?
Project Details
HVAC work estimated separately as part of a broader bathroom and bedroom renovation
Quote Details
- Perform manual J Load calculation to understand true heating and cooling loads for the area of house served by the furnace - Furnish and install new Heatpump system consisting of Outdoor Unit and Wall Mounted Indoor Unit - Furnish and install Refrigerant piping, interlock wiring and drain tubing - Furnish and install Linehide to cover refrigerant , drain and wire - Furnish and install Condenser Pad - Start up and check test of operation - 1 year labor warranty - 12 year limited manufacturer’s parts warranty
You say...
Vote Distribution
These ratings are not endorsed by Quote Critic. They are submitted by other Quote Critic users like you.
More Details
Category
HVAC
Price
$8,300
Quote Date
June 4, 2025
Location
New York
Brand/model
Mitsubishi
BTU tonnage
9000
Fuel type
Electric
Labor warranty
1
Parts warranty
12
System type
Heat pump
Comments (1)
Similar Quotes
Perform comprehensive HVAC system repair and maintenance
This quote covers a comprehensive set of HVAC services, including: - Uninstallation and disposal of the old damaged coil. - Leak free installation of the new coil. - Full system testing and calibration for peak performance. - Uninstallation and disposal of the old damaged filter drier. - Leak free installation of the new filter drier. - Full system testing and calibration for peak performance. - Refrigerant leak detection. - Recover refrigerant. - Nitrogen purge. - Leak repair. - Pressure test. - All refrigerant recovery and recycling following EPA protocol. - Purging refrigerant lines with dry nitrogen. - Accurate refrigerant weigh in/out with calibrated scale. - Complete refrigerant testing for peak system operation using super heat and sub cooling diagnostics. - Adding refrigerant to EPA guidelines. - Remove schrader core with isolation tool. - Install new schrader core and new cap. - Leak test service valve.
Install a Mitsubishi mini split in my garage
This quote is for the installation of a Mitsubishi P-Series mini-split hyper-heat pump system in my garage. The system includes: - Type: Single Wall Mounted Mini-Split Hyper-Heat Pump System - Brand: Mitsubishi P-Series - Cooling/Heating Capacity: 31,000 BTU - Efficiency: 23.2 SEER2 - Refrigerant: R454B - Outdoor Unit Model: PUZ-AK30NLHZ - Indoor Unit Model: PKA-AK30NL
Install a Mitsubishi MXZ ducted heat pump system
This quote is for the installation of a Mitsubishi MXZ (Variable Speed) Hyper-Heat ducted heat pump system. The scope of work includes: - Removal and recycling of existing heat pump and indoor heads - Relocation of outdoor unit to the back side of the property, including installation of a new concrete pad - Installation of a new Mitsubishi MXZ 48K BTU outdoor unit on the new pad - Installation of 4 new wall units: one 18K BTU in the main living area, one 12K BTU in the 2nd story master bedroom, one 9K BTU in the 2nd bedroom, and one 6K BTU in the 3rd bedroom - Installation of a new 5-port branch box and connection to new units - Installation of a new Mitsubishi MXZ 24K BTU outdoor unit on the 3rd story deck - Installation of 2 new wall units: one 9K BTU in the 3rd story bedroom and one 12K BTU in the 3rd story loft - Installation of new copper lines to each unit, including pump down and system charge - Installation of line hide on outdoor copper to protect the lines - Installation of a new condensate pump and drain outside - All electrical work performed by a licensed electrician (note: cost may vary if electrical upgrades are needed) - Includes permit, electrical, parts, and labor - Equipment qualifies for the 2025 Federal Tax Credit - Warranty: 12-year parts warranty with 3-year labor on all units (restrictions apply) - Warranty: 3-year workmanship warranty (restrictions apply) - Note: Customer is responsible for all sheet rock repairs.