Is $10,000 to install goodman 2.5 ton air conditioner and evaporator coil a fair price?
Project Details
The homeowner has a new furnace but no central a/c. They are comparing two quotes for a new installation and noted a $1,000 price difference between their top two options.
Quote Details
Installation of a new Goodman central air conditioning system including: - Goodman GLXS4B 2.5 Ton Condenser (15.2 SEER2, R-32 refrigerant) - Goodman CAPTA3022A3 Evaporator Coil (2.5 Ton, AlumaFin7) - New copper line set and 220v circuit - Full permit package including planning, drawings, and city inspection - Professional HERS testing for Title 24 compliance - Line-set painting service (client provides paint) - Removal and disposal of old system components - 10-year parts warranty and 5-year labor warranty
You say...
Vote Distribution
These ratings are not endorsed by Quote Critic. They are submitted by other Quote Critic users like you.
More Details
Category
HVAC
Price
$10,000
Quote Date
June 12, 2026
Home Size
1,200 sq ft
Brand/model
Goodman GLXS4B
BTU tonnage
2.5 Ton
Efficiency rating
15.2 SEER2
Fuel type
Electric
Labor warranty
5
Parts warranty
10
System type
Air conditioner
Comments
No comments yet
Sign in to share your thoughts and ask questions.
Similar Quotes
Perform comprehensive HVAC system repair and maintenance
This quote covers a comprehensive set of HVAC services, including: - Uninstallation and disposal of the old damaged coil. - Leak free installation of the new coil. - Full system testing and calibration for peak performance. - Uninstallation and disposal of the old damaged filter drier. - Leak free installation of the new filter drier. - Full system testing and calibration for peak performance. - Refrigerant leak detection. - Recover refrigerant. - Nitrogen purge. - Leak repair. - Pressure test. - All refrigerant recovery and recycling following EPA protocol. - Purging refrigerant lines with dry nitrogen. - Accurate refrigerant weigh in/out with calibrated scale. - Complete refrigerant testing for peak system operation using super heat and sub cooling diagnostics. - Adding refrigerant to EPA guidelines. - Remove schrader core with isolation tool. - Install new schrader core and new cap. - Leak test service valve.
Install Mitsubishi 9KBTU Hyperheat Mini Split Heat Pump System for one room
- Perform manual J Load calculation to understand true heating and cooling loads for the area of house served by the furnace - Furnish and install new Heatpump system consisting of Outdoor Unit and Wall Mounted Indoor Unit - Furnish and install Refrigerant piping, interlock wiring and drain tubing - Furnish and install Linehide to cover refrigerant , drain and wire - Furnish and install Condenser Pad - Start up and check test of operation - 1 year labor warranty - 12 year limited manufacturer’s parts warranty
Replace air conditioner and evaporator coil
Installation of a new Goodman GLXS4B Series Split System Air Conditioner and CAPF Series Evaporator Coil. - Dispose of old equipment and recover refrigerant per EPA regulations - Install new evaporator coil and matching air conditioner (up to 15.2 SEER2) - Seal all seams with UL181 aluminum foil tape and mastic - Connect high and low voltage wiring - Chemically clean and flush copper lines, reconnect with 15 silver solder - Pressure test to 350 psi and perform triple vacuum test below 500 microns - Install new 3-inch plastic pad under the air conditioner - Perform complete system startup, performance, and safety testing - Includes R-32 refrigerant and 10-year limited parts warranty