Is $7,110 to install a Mitsubishi mini-split system in the basement a fair price?
Project Details
I received a quote to install a mini-split in my basement and am looking for feedback on the price. The installation will require drilling through concrete to the outside and is expected to be an all-day job. I anticipate a $625 rebate and a $1,945 federal tax credit, bringing the net price down to $4,540. I've found the unit and condenser combo online for approximately $3,000, which suggests about $4,110 for labor, making the overall cost seem questionable to me.
Quote Details
Furnish and installation of a Mitsubishi mini-split system in the basement room on the exterior wall. This system is designed to cover the heating and cooling requirements for the area. - Indoor Unit: 1 Mitsubishi wall-mounted unit, 12,000 BTU (1 ton) hyperheat unit (MSZ-FX12NL)- Outdoor Unit: Condenser (MUZ-FX12NLHZ) mounted on a pad and stand on the left side of the house
You say...
Vote Distribution
These ratings are not endorsed by Quote Critic. They are submitted by other Quote Critic users like you.
More Details
Category
HVAC
Price
$7,110
Quote Date
July 11, 2025
Location
Massachusetts
Brand/model
Mitsubishi MSZ-FX12NL / MUZ-FX12NLHZ
BTU tonnage
12,000 BTU (1 ton)
Efficiency rating
hyperheat
Fuel type
Electric
System type
Ductless mini Split, Heat pump
Comments
No comments yet
Sign in to share your thoughts and ask questions.
Similar Quotes
Install Mitsubishi 9KBTU Hyperheat Mini Split Heat Pump System for one room
- Perform manual J Load calculation to understand true heating and cooling loads for the area of house served by the furnace - Furnish and install new Heatpump system consisting of Outdoor Unit and Wall Mounted Indoor Unit - Furnish and install Refrigerant piping, interlock wiring and drain tubing - Furnish and install Linehide to cover refrigerant , drain and wire - Furnish and install Condenser Pad - Start up and check test of operation - 1 year labor warranty - 12 year limited manufacturer’s parts warranty
Perform comprehensive HVAC system repair and maintenance
This quote covers a comprehensive set of HVAC services, including: - Uninstallation and disposal of the old damaged coil. - Leak free installation of the new coil. - Full system testing and calibration for peak performance. - Uninstallation and disposal of the old damaged filter drier. - Leak free installation of the new filter drier. - Full system testing and calibration for peak performance. - Refrigerant leak detection. - Recover refrigerant. - Nitrogen purge. - Leak repair. - Pressure test. - All refrigerant recovery and recycling following EPA protocol. - Purging refrigerant lines with dry nitrogen. - Accurate refrigerant weigh in/out with calibrated scale. - Complete refrigerant testing for peak system operation using super heat and sub cooling diagnostics. - Adding refrigerant to EPA guidelines. - Remove schrader core with isolation tool. - Install new schrader core and new cap. - Leak test service valve.
Install Mitsubishi mini split system with 2 outdoor and 5 indoor units
This quote is for the installation of a Mitsubishi Mini Split system, including two outdoor units and five indoor units, designed to provide heating and cooling to the home. The total cost includes materials, installation labor, and tax. The system utilizes Mitsubishi Hyper-Heating technology. - Outdoor Unit 1: Mitsubishi MXZ-2D20NL (2-ton, 2-zone, ductless) - Indoor Units (for Unit 1): Two Mitsubishi MSZ-GX12NL (12,000 BTU) - Outdoor Unit 2: Mitsubishi MXZ-3D24NL (2-ton, 3-zone, ductless) - Indoor Units (for Unit 2): Three Mitsubishi MSZ-GX09NL (9,000 BTU) - Materials Cost: $16,000 - Installation Labor Cost: $5,000 - Tax: $1,000