Is $9,290 to install a 2.5 ton trane ac system and 80% furnace a fair price?
Project Details
Old AC is not cooling the home. Split level/ 3 floor house. We have lived here for about 15 years and the unit was there before we moved in.
Quote Details
Complete replacement of HVAC system with Trane equipment. - Recovery of existing refrigerant per EPA regulation - Remove and dispose of existing AC condenser, coil, and furnace - Install new 2.5 ton AC Trane system and 80% furnace - Reconnect to existing duct system - Replace line set (3/8 x 7/8) and communication wire - Replace 8 ft of B flue pipe to code - Replace outdoor whip and disconnect - Replace gas line connection to code - Replace 20 ft of 3/4 pvc condensation drain - Remove and redo return air grill and box - Braze, nitrogen pressure test, vacuum, and charge system - System startup, commissioning, and performance testing
You say...
Vote Distribution
These ratings are not endorsed by Quote Critic. They are submitted by other Quote Critic users like you.
More Details
Category
HVAC
Price
$9,290
Quote Date
April 20, 2026
Location
Georgia
Home Size
1,600 sq ft
Brand/model
Trane
BTU tonnage
2.5 Ton
Efficiency rating
80% AFUE
Fuel type
Natural gas
System type
Furnace, Air conditioner
Comments
No comments yet
Sign in to share your thoughts and ask questions.
Similar Quotes
Perform comprehensive HVAC system repair and maintenance
This quote covers a comprehensive set of HVAC services, including: - Uninstallation and disposal of the old damaged coil. - Leak free installation of the new coil. - Full system testing and calibration for peak performance. - Uninstallation and disposal of the old damaged filter drier. - Leak free installation of the new filter drier. - Full system testing and calibration for peak performance. - Refrigerant leak detection. - Recover refrigerant. - Nitrogen purge. - Leak repair. - Pressure test. - All refrigerant recovery and recycling following EPA protocol. - Purging refrigerant lines with dry nitrogen. - Accurate refrigerant weigh in/out with calibrated scale. - Complete refrigerant testing for peak system operation using super heat and sub cooling diagnostics. - Adding refrigerant to EPA guidelines. - Remove schrader core with isolation tool. - Install new schrader core and new cap. - Leak test service valve.
Install Mitsubishi 9KBTU Hyperheat Mini Split Heat Pump System for one room
- Perform manual J Load calculation to understand true heating and cooling loads for the area of house served by the furnace - Furnish and install new Heatpump system consisting of Outdoor Unit and Wall Mounted Indoor Unit - Furnish and install Refrigerant piping, interlock wiring and drain tubing - Furnish and install Linehide to cover refrigerant , drain and wire - Furnish and install Condenser Pad - Start up and check test of operation - 1 year labor warranty - 12 year limited manufacturer’s parts warranty
Install a 2-ton 16 seer2 trane ac split system and 95% afue gas furnace
Remove existing 2 ton Split system AC and Furnace equipment and install complete new 2 ton 16 SEER2 TRANE AC Split System to condition the main level of the home. - 5TTR5024A1 Outdoor Unit with Matching Evaporator coil - S9X2B060U4P Two-stage 95% AFUE Gas Furnace - Outdoor Unit Pad - New Honeywell Digital Programmable Thermostat - New Refrigerant Line-Set and control wire to outdoor unit - Reconnect to Existing Power Wiring, Drain Lines, and Ducting - 10 years on Equipment Parts from TRANE - 1 year on All Installation Parts & Labor