Is $16,082 to install a Mitsubishi MXZ-C Hyper Heat Variable Speed Mini Split system a fair price?
Quote Details
This quote is for the professional installation of a Mitsubishi MXZ-C Hyper Heat Variable Speed Mini Split Heat Pump system, including two indoor units and associated electrical work. - Outdoor Unit: Mitsubishi MXZ-C Hyper Heat Variable Speed Mini Split Heat Pump Condenser - Outdoor Unit Capacity: 1.66 Ton - Outdoor Unit Efficiency: Up to 16.5 SEER2, Up to 9.2 HSPF2 - Outdoor Unit Features: Multi-zone, H2i hyper-heating, Variable speed INVERTER-driven compressor, Built-in base pan heater, Blue Fin anti-corrosion treatment - Outdoor Unit Sound Level: As low as 54 dB(A) (operation), 58dB (general) - Outdoor Unit Heating Performance: 100% heating capacity at 5°F, 93% heating capacity at -13°F - Outdoor Unit Warranty: 12-year conditional warranty on compressor and parts with registration (residential use only) - Indoor Units: 2 x Mitsubishi MSZ-FX Wall Mount Indoor Unit - Indoor Unit Capacity: 0.75 Ton each - Ductless Installation: Professional installation by licensed technicians - Installation Work Items: - Extend line set & control wire between the indoor and outdoor units - Cover line set in exposed areas with line hide - Air seal all line set penetrations to the outdoors - Install condensate lines to exterior - Mount outdoor unit on equipment pad - All lines will be connected and leak tested - Unit will be evacuated and charged - Start up and test equipment - Remove and haul away existing unit to recycle center - Electrical Work: Subcontractor to add new electrical circuit and reconnect old A/C
You say...
These ratings are not endorsed by Quote Critic. They are submitted by other Quote Critic users like you.
More Details
Category
HVAC
Price
$16,082
Quote Date
August 20, 2025
Brand/model
Mitsubishi MXZ-C Hyper Heat
BTU tonnage
1.66 Ton
Efficiency rating
Up to 16.5 SEER2, Up to 9.2 HSPF2
Fuel type
Electric
Parts warranty
12
System type
Heat pump, Ductless mini Split
Comments
No comments yet
Sign in to share your thoughts and ask questions.
Similar Quotes
Install Mitsubishi 9KBTU Hyperheat Mini Split Heat Pump System for one room
- Perform manual J Load calculation to understand true heating and cooling loads for the area of house served by the furnace - Furnish and install new Heatpump system consisting of Outdoor Unit and Wall Mounted Indoor Unit - Furnish and install Refrigerant piping, interlock wiring and drain tubing - Furnish and install Linehide to cover refrigerant , drain and wire - Furnish and install Condenser Pad - Start up and check test of operation - 1 year labor warranty - 12 year limited manufacturer’s parts warranty
Perform comprehensive HVAC system repair and maintenance
This quote covers a comprehensive set of HVAC services, including: - Uninstallation and disposal of the old damaged coil. - Leak free installation of the new coil. - Full system testing and calibration for peak performance. - Uninstallation and disposal of the old damaged filter drier. - Leak free installation of the new filter drier. - Full system testing and calibration for peak performance. - Refrigerant leak detection. - Recover refrigerant. - Nitrogen purge. - Leak repair. - Pressure test. - All refrigerant recovery and recycling following EPA protocol. - Purging refrigerant lines with dry nitrogen. - Accurate refrigerant weigh in/out with calibrated scale. - Complete refrigerant testing for peak system operation using super heat and sub cooling diagnostics. - Adding refrigerant to EPA guidelines. - Remove schrader core with isolation tool. - Install new schrader core and new cap. - Leak test service valve.
Install Mitsubishi mini split system with 2 outdoor and 5 indoor units
This quote is for the installation of a Mitsubishi Mini Split system, including two outdoor units and five indoor units, designed to provide heating and cooling to the home. The total cost includes materials, installation labor, and tax. The system utilizes Mitsubishi Hyper-Heating technology. - Outdoor Unit 1: Mitsubishi MXZ-2D20NL (2-ton, 2-zone, ductless) - Indoor Units (for Unit 1): Two Mitsubishi MSZ-GX12NL (12,000 BTU) - Outdoor Unit 2: Mitsubishi MXZ-3D24NL (2-ton, 3-zone, ductless) - Indoor Units (for Unit 2): Three Mitsubishi MSZ-GX09NL (9,000 BTU) - Materials Cost: $16,000 - Installation Labor Cost: $5,000 - Tax: $1,000