Is $20,000 to install a 4-head fujitsu 36k btu mini split system a fair price?
Project Details
Homeowner in the Northeast previously used three window units (approx 19,300 BTU total) to cool their 2100 sqft home. They upgraded to a multi-head mini split system but experienced significant installation issues including incorrect wiring, improper charging, and lack of nitrogen purging during brazing.
Quote Details
Installation of a multi-zone heat pump system including: - One Fujitsu 36k BTU outdoor condenser - Four indoor heads: one 18k BTU, one 9k BTU, and two 7k BTU units - Lineset installation and refrigerant charging - Control wiring and condensate drainage
You say...
Vote Distribution
These ratings are not endorsed by Quote Critic. They are submitted by other Quote Critic users like you.
More Details
Category
HVAC
Price
$20,000
Quote Date
May 23, 2026
Location
Nebraska
Home Size
2,100 sq ft
Brand/model
Fujitsu 36k BTU
BTU tonnage
36,000 BTU
Fuel type
Electric
System type
Heat pump, Ductless mini Split
Comments
No comments yet
Sign in to share your thoughts and ask questions.
Similar Quotes
Install Mitsubishi 9KBTU Hyperheat Mini Split Heat Pump System for one room
- Perform manual J Load calculation to understand true heating and cooling loads for the area of house served by the furnace - Furnish and install new Heatpump system consisting of Outdoor Unit and Wall Mounted Indoor Unit - Furnish and install Refrigerant piping, interlock wiring and drain tubing - Furnish and install Linehide to cover refrigerant , drain and wire - Furnish and install Condenser Pad - Start up and check test of operation - 1 year labor warranty - 12 year limited manufacturer’s parts warranty
Perform comprehensive HVAC system repair and maintenance
This quote covers a comprehensive set of HVAC services, including: - Uninstallation and disposal of the old damaged coil. - Leak free installation of the new coil. - Full system testing and calibration for peak performance. - Uninstallation and disposal of the old damaged filter drier. - Leak free installation of the new filter drier. - Full system testing and calibration for peak performance. - Refrigerant leak detection. - Recover refrigerant. - Nitrogen purge. - Leak repair. - Pressure test. - All refrigerant recovery and recycling following EPA protocol. - Purging refrigerant lines with dry nitrogen. - Accurate refrigerant weigh in/out with calibrated scale. - Complete refrigerant testing for peak system operation using super heat and sub cooling diagnostics. - Adding refrigerant to EPA guidelines. - Remove schrader core with isolation tool. - Install new schrader core and new cap. - Leak test service valve.
Install a fujitsu mini split system
Fujitsu Mini Split System AHRI #215735282 - 1 FUJITSU AOUH36KWAH4 Heat Pump - 1 Indoor High Wall Unit 9,000 BTU (Kitchen) - 2 Indoor High Wall Units 15,000 BTU (Upstairs & Living Room)