Is $14,800 to install 3-ton heat pump system and replace all ductwork a fair price?
Project Details
Recently bought the house a year and a half ago. First baby is coming, so temperature control is needed. The house has original ducting with asbestos and a 21-year-old gas heater, but no existing AC.
Quote Details
Complete replacement of a 21-year-old gas furnace with a 3-ton heat pump system and full duct replacement. Includes: - Install 3-ton slim line condenser (19 SEER2, 11.7 EER2, Inverter R32) - Install 3-ton 115V core furnace and upflow evaporator coil - Remove existing asbestos ducts and install all new ducts - Add 2 supply cans in bathrooms with bar type grills - Run refrigeration lines with line set cover and filter dryer - Install new inline supply plenum, filter base, and filter - Install condenser pad, disconnect, whip, and secondary safety switch - Install condensation pump and wifi thermostat - Electrical work for 208/230V outside and new breaker - 2-year labor warranty and 10-year parts/compressor warranty
You say...
Vote Distribution
These ratings are not endorsed by Quote Critic. They are submitted by other Quote Critic users like you.
More Details
Category
HVAC
Price
$14,800
Quote Date
April 8, 2026
Location
California
Home Size
1,300 sq ft
Year Built
1962
BTU tonnage
3 Ton
Efficiency rating
19 SEER2
Fuel type
Electric
Labor warranty
2
Parts warranty
10
System type
Heat pump, Furnace
Comments
No comments yet
Sign in to share your thoughts and ask questions.
Similar Quotes
Install Mitsubishi 9KBTU Hyperheat Mini Split Heat Pump System for one room
- Perform manual J Load calculation to understand true heating and cooling loads for the area of house served by the furnace - Furnish and install new Heatpump system consisting of Outdoor Unit and Wall Mounted Indoor Unit - Furnish and install Refrigerant piping, interlock wiring and drain tubing - Furnish and install Linehide to cover refrigerant , drain and wire - Furnish and install Condenser Pad - Start up and check test of operation - 1 year labor warranty - 12 year limited manufacturer’s parts warranty
Perform comprehensive HVAC system repair and maintenance
This quote covers a comprehensive set of HVAC services, including: - Uninstallation and disposal of the old damaged coil. - Leak free installation of the new coil. - Full system testing and calibration for peak performance. - Uninstallation and disposal of the old damaged filter drier. - Leak free installation of the new filter drier. - Full system testing and calibration for peak performance. - Refrigerant leak detection. - Recover refrigerant. - Nitrogen purge. - Leak repair. - Pressure test. - All refrigerant recovery and recycling following EPA protocol. - Purging refrigerant lines with dry nitrogen. - Accurate refrigerant weigh in/out with calibrated scale. - Complete refrigerant testing for peak system operation using super heat and sub cooling diagnostics. - Adding refrigerant to EPA guidelines. - Remove schrader core with isolation tool. - Install new schrader core and new cap. - Leak test service valve.
Replace a 75 gallon natural gas power vented water heater
This quote includes the supply and installation of a new 75-gallon natural gas power vented water heater, along with all necessary piping and fittings. - Water Heater Type: 75 gallon natural gas power vented - Included Components: Mixing valve, Expansion tank - Piping Material: 3/4 copper - Fittings: All 3/4 fittings needed to assemble the water heater correctly