Is $600 to upgrade HVAC passive drainage system to active system with pump a fair price?
Project Details
I recently had an HVAC drain clog mid-summer. The original old drain was in poor condition and suffered an impenetrable clog, causing the drain pan’s cut-off switch to constantly shut down the system. I was encouraged to upgrade the passive drainage system to an active system using a pump to help prevent future clogs. I am disappointed in the ½-inch clear vinyl tubing that was hung along the old secondary drain’s PVC piping, as it looks like a cheaply done chore rather than a professionally done job. I voiced concern over the flimsy vinyl tubing to the tech, who said it's what the supply house gave him. My concerns are whether the sharp turns risk future occlusions, if the large soffit hole poses a significant opportunity for wildlife to invade the attic, and if this is considered reasonable and customary. I need some guidance before I call to complain and leave a poor Google review.
Quote Details
This quote covers the upgrade of the HVAC drainage system from a passive to an active system, including the installation of a new condensate pump and associated plumbing. - Run New: 3/4” PVC Condensate Line into Pump - Install & Wire: New 120 V Condensate Pump - Run: 1/2” Discharge Line Out from Soffit - Correct: 3/4” Emergency PVC Drain Line Safety Switches - Secondary Condensate
You say...
These ratings are not endorsed by Quote Critic. They are submitted by other Quote Critic users like you.
More Details
Category
HVAC
Price
$600
Quote Date
November 13, 2025
Year Built
1979
Comments
No comments yet
Sign in to share your thoughts and ask questions.
Similar Quotes
Perform comprehensive HVAC system repair and maintenance
This quote covers a comprehensive set of HVAC services, including: - Uninstallation and disposal of the old damaged coil. - Leak free installation of the new coil. - Full system testing and calibration for peak performance. - Uninstallation and disposal of the old damaged filter drier. - Leak free installation of the new filter drier. - Full system testing and calibration for peak performance. - Refrigerant leak detection. - Recover refrigerant. - Nitrogen purge. - Leak repair. - Pressure test. - All refrigerant recovery and recycling following EPA protocol. - Purging refrigerant lines with dry nitrogen. - Accurate refrigerant weigh in/out with calibrated scale. - Complete refrigerant testing for peak system operation using super heat and sub cooling diagnostics. - Adding refrigerant to EPA guidelines. - Remove schrader core with isolation tool. - Install new schrader core and new cap. - Leak test service valve.
Install Mitsubishi 9KBTU Hyperheat Mini Split Heat Pump System for one room
- Perform manual J Load calculation to understand true heating and cooling loads for the area of house served by the furnace - Furnish and install new Heatpump system consisting of Outdoor Unit and Wall Mounted Indoor Unit - Furnish and install Refrigerant piping, interlock wiring and drain tubing - Furnish and install Linehide to cover refrigerant , drain and wire - Furnish and install Condenser Pad - Start up and check test of operation - 1 year labor warranty - 12 year limited manufacturer’s parts warranty
Upgrade duct work and run a new drain line
This quote is for addressing ongoing issues with the HVAC system. It includes: - Upgrade the existing duct work - Run a new drain line out of the attic