Is $946 to replace AC electrical components and hard start kit a fair price?
Project Details
I had a new HVAC company out to do a tuneup on my AC. The tech said that I had a dying capacitor and needed an electrical lead replaced, and that the work would take no more than half an hour. The quote I got back seemed suspiciously high, so I want to get a reality check to see if I'm being taken for a ride. The AC unit is 9 years old in a townhome and is builder grade. The only issue it's had is a coolant leak, which was repaired last year. There was already a hard start kit on it, but the tech said it wasn't working. I'm a handy guy, but not nearly confident enough to do something like this. I have zero knowledge base here.
Quote Details
This estimate includes the replacement of several key AC components: - Economy Generic Contactor: 2 Pole, 40 Amp, 24V - Economy Dual Capacitor: 45 + 5 Mfd, 370/440V (round or oval) - Hard Start Kit: 1-3 ton
You say...
Vote Distribution
These ratings are not endorsed by Quote Critic. They are submitted by other Quote Critic users like you.
More Details
Category
HVAC
Price
$946
Quote Date
June 18, 2025
Location
Colorado
Year Built
2014
BTU tonnage
1-3 ton
Fuel type
Electric
System type
Air conditioner
Comments
No comments yet
Sign in to share your thoughts and ask questions.
Similar Quotes
Perform comprehensive HVAC system repair and maintenance
This quote covers a comprehensive set of HVAC services, including: - Uninstallation and disposal of the old damaged coil. - Leak free installation of the new coil. - Full system testing and calibration for peak performance. - Uninstallation and disposal of the old damaged filter drier. - Leak free installation of the new filter drier. - Full system testing and calibration for peak performance. - Refrigerant leak detection. - Recover refrigerant. - Nitrogen purge. - Leak repair. - Pressure test. - All refrigerant recovery and recycling following EPA protocol. - Purging refrigerant lines with dry nitrogen. - Accurate refrigerant weigh in/out with calibrated scale. - Complete refrigerant testing for peak system operation using super heat and sub cooling diagnostics. - Adding refrigerant to EPA guidelines. - Remove schrader core with isolation tool. - Install new schrader core and new cap. - Leak test service valve.
Install Mitsubishi 9KBTU Hyperheat Mini Split Heat Pump System for one room
- Perform manual J Load calculation to understand true heating and cooling loads for the area of house served by the furnace - Furnish and install new Heatpump system consisting of Outdoor Unit and Wall Mounted Indoor Unit - Furnish and install Refrigerant piping, interlock wiring and drain tubing - Furnish and install Linehide to cover refrigerant , drain and wire - Furnish and install Condenser Pad - Start up and check test of operation - 1 year labor warranty - 12 year limited manufacturer’s parts warranty
Replace 30 can lights, 11 dimmers, 3 bathroom lights, change/move kitchen light, replace under cabinet light
This estimate covers labor and materials for various electrical and lighting upgrades. Please note that patching and painting are not included in this estimate, but referrals can be provided. Any additional required alterations by the city or client not explicitly listed will be billed on a time and materials basis. - Labor: Bypass transformer and install LED trim on 4" LV cans (30 units) - Materials: Elco 4" Warm Dim Trim line voltage (30 units) - Labor: Installation, syncing, and programming (billed time and materials) - Reused Components: Existing three-way switches (on/off functionality) - Included Components: Dimmers in bathrooms, screwless cover plates throughout - Lighting Control: Lutron Caseta Diva Style (11 units) - Lighting Control: Lutron Bridge (1 unit) - Lighting Control: 4-button Pico remote (2 units) - Lighting Control: Standard Pico with stand (2 units - one for living room, one for master bedroom) - Lighting Control: Pico Holder (1 unit) - Cover Plate: White screwless 1-gang cover plate (15 units) - Cover Plate: 2-gang screwless cover plate (5 units) - Cover Plate: Lutron Screwless 3-gang cover plate (2 units) - Outlet/Cover Plate: Brown outlet and screwless cover plate for peninsula (1 unit) - Dimmer: DVCL153 (3 units) - Dimmer: Lutron CL Diva Dimmer (for bathrooms) (1 unit) - Labor: Relocate countertop light (includes covering old location with blank out) - Materials: Fan box, wire, protective materials - Labor: Replace under cabinet lights (2 units - 29" and 18") - Under Cabinet Lights: Elco 18" & 29" (1 unit)