Is $10,500 to install a Mitsubishi mini-split system (2 indoor units) a fair price?

- Perform manual J Load calculation to understand true heating and cooling loads for the area of house served by the furnace - Furnish and install new Heatpump system consisting of Outdoor Unit and Wall Mounted Indoor Unit - Furnish and install Refrigerant piping, interlock wiring and drain tubing - Furnish and install Linehide to cover refrigerant , drain and wire - Furnish and install Condenser Pad - Start up and check test of operation - 1 year labor warranty - 12 year limited manufacturer’s parts warranty

This quote is for a Mitsubishi mini-split heat pump system, a Hyperheat model designed for extreme temperatures. It includes the following components and features: - Indoor Unit: Mitsubishi MSZ-WX12NL (12,000 BTU)- Outdoor Unit: Mitsubishi MUZ-GX12NLHZ Heat Pump (1 ton)- SEER: 25.6- EER2: 13.35- HSPF: 10- Controls: MHK2 wireless remote kit thermostat

This quote is for the professional installation of a Mitsubishi MXZ-C Hyper Heat Variable Speed Mini Split Heat Pump system, including two indoor units and associated electrical work. - Outdoor Unit: Mitsubishi MXZ-C Hyper Heat Variable Speed Mini Split Heat Pump Condenser - Outdoor Unit Capacity: 1.66 Ton - Outdoor Unit Efficiency: Up to 16.5 SEER2, Up to 9.2 HSPF2 - Outdoor Unit Features: Multi-zone, H2i hyper-heating, Variable speed INVERTER-driven compressor, Built-in base pan heater, Blue Fin anti-corrosion treatment - Outdoor Unit Sound Level: As low as 54 dB(A) (operation), 58dB (general) - Outdoor Unit Heating Performance: 100% heating capacity at 5°F, 93% heating capacity at -13°F - Outdoor Unit Warranty: 12-year conditional warranty on compressor and parts with registration (residential use only) - Indoor Units: 2 x Mitsubishi MSZ-FX Wall Mount Indoor Unit - Indoor Unit Capacity: 0.75 Ton each - Ductless Installation: Professional installation by licensed technicians - Installation Work Items: - Extend line set & control wire between the indoor and outdoor units - Cover line set in exposed areas with line hide - Air seal all line set penetrations to the outdoors - Install condensate lines to exterior - Mount outdoor unit on equipment pad - All lines will be connected and leak tested - Unit will be evacuated and charged - Start up and test equipment - Remove and haul away existing unit to recycle center - Electrical Work: Subcontractor to add new electrical circuit and reconnect old A/C