Is $12,073 to install Amana 96% 80k variable furnace and 3 ton AC a fair price?
Project Details
I'm comparing two options, an Amana setup and an American Standard setup, which are similar in specs. I need to decide if I should go with the cheaper Amana or spend an extra $2,000 for the American Standard.
Quote Details
This quote is for the removal of the old furnace and AC, and the installation of a new Amana HVAC system. The system includes: - Furnace: Amana AMVC960803BN (96% 80k variable) - AC Unit: Amana AXV65S3U U side discharge (3 ton) - Connections: Fully connected to duct and gas piping - Controls: New vent and outside new Wi-Fi thermostat - Performance: Started and adjusted for optimum performance - AC Warranty: 15.2 SEER2 and up - Unit Replacement Warranty (Compressor): Limited lifetime (first 10 years, then one after that for 99 years) - Unit Replacement Warranty (Original Homeowner): Limited lifetime - Labor Warranty: Limited - Parts Warranty: 10 years (if registered), 5 years (standard) - Unit Replacement Warranty (Compressor and Heat Exchanger): Limited lifetime on select models
You say...
Vote Distribution
These ratings are not endorsed by Quote Critic. They are submitted by other Quote Critic users like you.
More Details
Category
HVAC
Price
$12,073
Quote Date
August 12, 2025
Brand/model
Amana AMVC960803BN Furnace, Amana AXV65S3U AC Unit
BTU tonnage
80,000 BTU Furnace, 3 Ton AC
Efficiency rating
96% AFUE Furnace, 15.2 SEER2 AC
Fuel type
Natural gas
Parts warranty
10
System type
Furnace, Air conditioner
Comments
No comments yet
Sign in to share your thoughts and ask questions.
Similar Quotes
Perform comprehensive HVAC system repair and maintenance
This quote covers a comprehensive set of HVAC services, including: - Uninstallation and disposal of the old damaged coil. - Leak free installation of the new coil. - Full system testing and calibration for peak performance. - Uninstallation and disposal of the old damaged filter drier. - Leak free installation of the new filter drier. - Full system testing and calibration for peak performance. - Refrigerant leak detection. - Recover refrigerant. - Nitrogen purge. - Leak repair. - Pressure test. - All refrigerant recovery and recycling following EPA protocol. - Purging refrigerant lines with dry nitrogen. - Accurate refrigerant weigh in/out with calibrated scale. - Complete refrigerant testing for peak system operation using super heat and sub cooling diagnostics. - Adding refrigerant to EPA guidelines. - Remove schrader core with isolation tool. - Install new schrader core and new cap. - Leak test service valve.
Install Mitsubishi 9KBTU Hyperheat Mini Split Heat Pump System for one room
- Perform manual J Load calculation to understand true heating and cooling loads for the area of house served by the furnace - Furnish and install new Heatpump system consisting of Outdoor Unit and Wall Mounted Indoor Unit - Furnish and install Refrigerant piping, interlock wiring and drain tubing - Furnish and install Linehide to cover refrigerant , drain and wire - Furnish and install Condenser Pad - Start up and check test of operation - 1 year labor warranty - 12 year limited manufacturer’s parts warranty
Upgrade an existing 15-year-old AC system with a new Amana 5-ton variable speed gas system
This quote is for the installation of a new Amana 16 SEER2 variable speed gas horizontal/upflow system. - System Type: Amana Texas Edition 16 SEER2 Variable Speed Gas- Tonnage: 5 Ton- Outdoor Unit Model: AXV6SS6010- Indoor Coil Model: CHPEA6030C3- Furnace Model: AMVC801005CN- Thermostat Model: ATST-CWE-BL-A- Included Components: Pad, Whip, Disconnect, TSTAT Communication, Supply Plenum, Return Plenum, Condenser, Evaporator Coil, Furnace, Drain Pan, Drain Safety Switch, Gas Line Drip Leg, Surge Protection- Warranty (Outdoor Unit): Lifetime- Warranty (Parts): 10 Years- Warranty (Labor): 10 Years- Service Plan: 1 Year