Is $1,750 to install pool filter and heat pump plumbing and electrical a fair price?
Project Details
I've purchased most of the equipment already, so the total of $1750 seems high. My main panel has a 60 amp breaker for the pool. The sub-panel has dedicated breakers for the light, pump filter, and a 30 amp GFCI for the heat pump. All wiring is #8. The breakers are Square D. The Hayward heat pump instructions specify a 30 amp breaker.
Quote Details
This quote covers the installation of pool equipment and associated plumbing and electrical work. The homeowner has already purchased the filter and heat pump. - Replacement of filter plumbing - Installation of heat pump and additional plumbing - Replacement of all plumbing from the pad to the filter, pump, and heat pump - Installation of a new pad - Running a whip to the existing electric box, which has a spare 30 amp 2 phase GFCI breaker - Labor: 4 hours at $200 per hour - Materials: Plumbing and cut-offs
You say...
Vote Distribution
These ratings are not endorsed by Quote Critic. They are submitted by other Quote Critic users like you.
More Details
Category
Pools
Price
$1,750
Quote Date
November 27, 2025
Heater Included?
No
Comments
No comments yet
Sign in to share your thoughts and ask questions.
Similar Quotes
Install Mitsubishi 9KBTU Hyperheat Mini Split Heat Pump System for one room
- Perform manual J Load calculation to understand true heating and cooling loads for the area of house served by the furnace - Furnish and install new Heatpump system consisting of Outdoor Unit and Wall Mounted Indoor Unit - Furnish and install Refrigerant piping, interlock wiring and drain tubing - Furnish and install Linehide to cover refrigerant , drain and wire - Furnish and install Condenser Pad - Start up and check test of operation - 1 year labor warranty - 12 year limited manufacturer’s parts warranty
Perform comprehensive HVAC system repair and maintenance
This quote covers a comprehensive set of HVAC services, including: - Uninstallation and disposal of the old damaged coil. - Leak free installation of the new coil. - Full system testing and calibration for peak performance. - Uninstallation and disposal of the old damaged filter drier. - Leak free installation of the new filter drier. - Full system testing and calibration for peak performance. - Refrigerant leak detection. - Recover refrigerant. - Nitrogen purge. - Leak repair. - Pressure test. - All refrigerant recovery and recycling following EPA protocol. - Purging refrigerant lines with dry nitrogen. - Accurate refrigerant weigh in/out with calibrated scale. - Complete refrigerant testing for peak system operation using super heat and sub cooling diagnostics. - Adding refrigerant to EPA guidelines. - Remove schrader core with isolation tool. - Install new schrader core and new cap. - Leak test service valve.
Replace a 75 gallon natural gas power vented water heater
This quote includes the supply and installation of a new 75-gallon natural gas power vented water heater, along with all necessary piping and fittings. - Water Heater Type: 75 gallon natural gas power vented - Included Components: Mixing valve, Expansion tank - Piping Material: 3/4 copper - Fittings: All 3/4 fittings needed to assemble the water heater correctly