Is $1,748 to install additional attic insulation to R49 a fair price?
Project Details
I am seeking a sanity check on whether I need more attic insulation. I had a new roof installed in April of this year. For the past few winters, I've noticed large icicles forming at the edge of the roof line near the gutters, and I suspect ice dams are forming, especially in corners where baffles appear to be missing. My current insulation is about 10-12 inches deep. My heating and cooling bills are not particularly high (around $80 for gas heating and $80 for electrical A/C), and I maintain the house at 70F year-round. A new HVAC system was installed in 2019. I plan to contact the contractor to request insulation to R60 and to emphasize attention to the ice damming corners. I am also looking to take advantage of a tax credit.
Quote Details
This quote is for installing additional cellulose insulation in the attic, including necessary air sealing and overhang baffles. - Insulation Type: Cellulose - Target R-Value: R49 - Included Services: Overhang baffles installation, all necessary air sealing
You say...
Vote Distribution
These ratings are not endorsed by Quote Critic. They are submitted by other Quote Critic users like you.
More Details
Category
Insulation
Price
$1,748
Quote Date
February 1, 2026
Location
Ohio
Year Built
2007
Insulation Type
Blown In
R Value
R49
Comments
No comments yet
Sign in to share your thoughts and ask questions.
Similar Quotes
Install R-49 cellulose insulation in the attic
- Air seal the attics wire & plumbing penetrations to stop heat loss.- Install baffles in the attic eaves for proper low ventilation & eave protection.- Tyvek & dense pack the attic common walls with cellulose.- Tyvek & dense pack the slope ceiling over basement stairs with cellulose.- Insulate & weather strip the attic access.- Open blow the house attic to R-49 with cellulose (overall height 15 inches).- Attic is currently 3 to 5 inches.
Install blown-in cellulose insulation to improve R-value to R-49
The project involves improving the attic insulation from an existing R-value of 21 to a new R-value of 49. This will be achieved by installing blown-in cellulose insulation and baffles. - Insulation Type: Blown-in cellulose- Area: 1700 sq ft- R-value Improvement: From R-21 to R-49- Baffles: 30 baffles to be installed
Install additional insulation in attic and basement
This quote is for installing additional insulation in the attic and basement based on a home energy audit recommendation. - Attic Insulation: Blown-in cellulose insulation (1137 sqft) to supplement existing R30 insulation, bringing it to R38. - Basement Insulation: R-19 faced fiberglass insulation (1269 sqft) installed on the ceiling, addressing thin existing insulation with large gaps.